Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the Fridge-Freezer combination 8
- Before use 10
- Settings 11
- Temperature and door alarm 14
- Setting the temperature 15
- SmartFresh drawers 17
- Using the refrigerator efficiently 20
- Using the freezer efficiently 21
- SuperCool 23
- Ice cube maker 24
- Automatic defrost 25
- Adjusting the interior fittings 26
- Cleaning and care 30
- Water filter 35
- Lead free certificate 40
- Frequently asked questions 41
- Noises 48
- After sales service 49
- Caring for the environment 52
- Installation 53
- Dimensions 59
- Installing the appliance 63
- Plumbing 80
- Electrical connection 83
- RemoteVision (optional accessory) 84
- Contact details 87
Now connect the water supply to the
appliance (see "Plumbing").
Preparing the custom door
For best results, it is important to
mount the upper door before the
lower door.
^
Open the appliance door.
^ Unscrew the installation supports l
from the appliance door.
^
Loosen the remaining screws from
the strips m on each side of the door,
then remove.
^
Set aside the screws and side strips
m - you will need them again later.
^
Remove the light switch cover (see
arrow).
^ Measure the distance X between the
bracket from the upper door and the
overhead furniture/fixtures.
^ Loosen the two nuts.
Set aside the nuts - you will need
them again later.
^ With the inside facing up, lay the
custom door on a stable surface (to
avoid scratch marks, place some
plastic or a cloth on the surface).
Installing the appliance
73