Operating and Installation instructions
ManualsBrandsMiele ManualsBottom Mount Refrigerators36 Inch Smart Built-In Bottom-Freezer Refrigerator with WiFiConn@ct, 19.6 Cu. Ft. Total Capacity, Push2Open, MasterSensor, MasterFresh, DynaCool, DuplexCool Pro, NoFrost, BrilliantLight, MaxLoad Hinge, and Overflow Protection: Panel Ready, Right Hinge
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of cabinet fronts
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet fronts
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the retaining brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Limiting the opening angle of the appliance door
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Water filter
115
The appliance is supplied with a water
filter (IntensiveClear 2.0 charcoal filter)
that filters supply water for making ice
cubes.
The IntensiveClear 2.0 charcoal filter
improves the taste and smell of the ice
cubes by removing chlorine and other
substances from supply water.
However, to ensure the highest qual-
ity of the ice cubes, it is essential to
change the IntensiveClear 2.0 char-
coal filter regularly.
Please note:
- If an external water filter is attached
to your household water supply, use
an IntensiveClear 2.0 mesh filter in
place of an IntensiveClear 2.0 char-
coal filter (see Accessories – Optional
accessories”).
- After inserting a new water filter (In-
tensiveClear 2.0 mesh filter and In-
tensiveClear 2.0 charcoal filter), dis-
pose of all ice cubes produced in the
next 24hours following the change.
- If you have not used the appliance or
the ice maker much in the last few
weeks or months, or if the ice cubes
smell unpleasant, replace the Inten-
siveClear 2.0 charcoal filter or clean
the IntensiveClear 2.0 mesh filter.
New water filters (IntensiveClear 2.0
mesh filters and IntensiveClear 2.0
charcoal filters) are available from
Miele Customer Service, from your
dealer, or via the internet.
Depending on the quantity of ice cubes
produced, the IntensiveClear 2.0 char-
coal filter must be changed approx. ev-
ery 6months.
Replace the water filter will appear on the
display.
An audible signal also sounds.
Confirm the message with OK.