Operating and Installation instructions
ManualsBrandsMiele ManualsBottom Mount Refrigerators36 Inch Smart Built-In Bottom-Freezer Refrigerator with WiFiConn@ct, 19.6 Cu. Ft. Total Capacity, Push2Open, MasterSensor, MasterFresh, DynaCool, DuplexCool Pro, NoFrost, BrilliantLight, MaxLoad Hinge, and Overflow Protection: Panel Ready, Right Hinge
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of cabinet fronts
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet fronts
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the retaining brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Limiting the opening angle of the appliance door
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Installation
*INSTALLATION*
30
To protect the floor during installation,
secure an off-cut of flooring or similar
material to the floor in front of the in-
stallation area.
Do not remove the installation aids
from the appliance door. These will
be required later for aligning the ap-
pliance in the installation niche.
Risk of damage and injury due to
the refrigeration appliance tipping
over.
As soon as you unscrew the brack-
ets that fix the refrigeration appliance
to the pallet, the appliance is no
longer secured.
Due to its weight and size, the refrig-
eration appliance must be installed
by two people.
2
Unscrew the fixing brackets.
With the help of several people as re-
quired, carefully lift the refrigeration
appliance from the pallet, starting
with the back of the appliance.
Risk of damaging the floor from
the load.
Moving the refrigeration appliance
can cause damage to the floor.
Move the refrigeration appliance
carefully on floors that are sensitive
to scratching.
As soon as you have set the appliance
upright, you can move it using the
rollers on the bottom.