Spec Sheet

HINGING DETAILS 90° OPENING
Specification Sheets TRS 04252019
Fully Integrated
36” MasterCool II
Available for the following models:
• K 29x1 Vi
• KF 29x1 Vi
Page 12 of 12
7/16”
(11 mm)
1-3/16”
(30mm)
1-7/16”
(36.5mm)
1-11/16”
(43mm)
1-15/16”
(49.2mm)
Handle or object that is
NOT ush with Cabinet
Front.
0-3/4” (19 mm)
1” (25 mm)
1-1/4” (32 mm)
1-1/2” (38 mm)
1-3/4” (44 mm)
2” (51 mm)
0-3/4” (19 mm)
1” (25 mm)
1-1/4” (32 mm)
1-1/2” (38 mm)
0-1/8” (3 mm)
When installing hinge side next to an appliance or object that is within range of the door panel,
limit the door opening angle to 90°. This is done by installing the banking pin as illustrated.
Insert the banking pin through the holes and drive in with a hammer.
DOOR SWING AT 90° OPENING
7/16” (11 mm)
38
11
/16” (982 mm)
Available for the following models:
• K 29x1 Vi
• KF 2901 Vi / KF 2911 Vi