Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Frequently Asked Questions
109
Problems with the ice cube maker
Problem Possible cause and solution
The Ice Maker is not
producing any ice
cubes.
The appliance and/or the Ice Maker is not turned on.
Turn on the appliance and/or the Ice Maker.
Check whether the water filter has been inserted
correctly (see “Water filter”, section “Changing the
water filter”).
The plumbed water connection was not installed.
Make sure that the plumbed water connection was
installed correctly.
The water intake is not open or has not been vented.
Open the water intake.
Check that the water supply has been vented.
There is a kink in the water hose.
Check the water hose and replace it, if necessary.
The temperature in the Freezer Zone is too high.
Select a lower temperature.
The appliance door has been opened too frequently,
causing the compressor to turn on more often and the
Ice Maker has iced up.
Only open the door when necessary and for as
short a time as possible.
The water pressure is too low.
Check that the water pressure is between 29 and
116psi (2 and 8bar).
Check if an incorrect valve has been installed,
making the pressure too low.
Remember that it can take up to 10hours for the
production of ice cubes to commence.