Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Water filter
116
Now reset the Water Filter Display us-
ing Settings mode in the display
(see “Selecting additional settings”,
section “Resetting Water Filter Dis-
play”).
When it is time to change the water fil-
ter again, the reminder for the Water Fil-
ter Display will appear in the display.
After inserting a new water filter, dis-
pose of all ice cubes produced in the
next 24hours following the change.
Using an external water filter
If an external water filter is fitted to your
household water supply, use a Bypass
water filter in place of an Active char-
coal filter.
In this case, you can switch off the
Water Filter Display (see “Selecting
additional settings”, section “Switch-
ing off the Water Filter Display”).