Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Building in the appliance
35
Adjust the rear feet with a ratchet
(attachment: 5/16" (8mm) socket) or
a TX20 screwdriver.
Adjust the front feet with a ratchet
(attachment: 5/16" (8mm) socket) or
a TX20 screwdriver.
Tip: Proceed carefully when adjusting
the feet, alternating between the left
and right feet.
Unscrew the feet and on both
sides at least until the marking on the
base is aligned with the required
11/4" (32mm) on the spacer. The
standard dimension of 11/4" (32mm)
relates to a niche height of
84" (2134mm).
It is important to align the feet to a
height of at least 11/4" (32mm) so
that the appliance's ventilation works
properly via the base.