Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Building in the appliance
36
Risk of damage!
Unscrew the feet only until the
marking on the base is aligned to a
maximum of 27/16" (62mm) (max.
niche height of 85 3/16" (2164mm)).
Otherwise the rear foot adjustment
will be damaged.
Use a level to check the alignment
of the appliance.
Securing the appliance in the
niche
Use the screws supplied to secure
the refrigeration appliance on both
sides.
In a side-by-side combination, only
the external panels of the two appli-
ances can be secured to the cabinet
wall.
Slide the cover onto the lower appli-
ance door from the inside.