Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Selecting additional settings
67
Deactivating Miele@home
In settings mode , use the and
arrow buttons to select Miele@home
and touch OK to confirm your selec-
tion.
Use the and arrow buttons to
select Deactivate and touch OK to
confirm your selection.
Deactivation successful appears in the
display.
Confirm the message with OK.
Your appliance is now disconnected
from your WiFi network.
The symbol will go out in the display.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you can still reactivate
the connection.
In settings mode , use the and
arrow buttons to select Miele@home
and touch OK to confirm your selec-
tion.
Use the and arrow buttons to
select Activate and touch OK to con-
firm your selection.
Activation successful appears in the dis-
play.
Confirm the message with OK.
If the WiFi connection is active, will
appear in the display.
Checking the WiFi connection status
In settings mode , use the and
arrow buttons to select Miele@home
and select OK to confirm your selec-
tion.
Use the and arrow buttons to
select Connection status and touch OK
to confirm your selection.
Information about the WiFi connection
status will then appear in the display:
– connected: there is a strong con-
nection,
– connected: there is an average
connection,
– connected: there is a weak con-
nection,
– : disconnected.