Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Selecting additional settings
74
The Water Filter Display has been
switched off.
Resetting Water Filter Display
After replacing the water filter (see “Wa-
ter filter”, section “Changing the water
filter”), you will have to reset the Water
Filter Display.
In settings mode, use the and
arrow buttons to select Water Filter
Display and select OK to confirm your
selection.
Use the and arrow buttons to
select Reset and touch OK to confirm
your selection.
The message Replace the water filter dis-
appears from the display.
The reminder function for the next water
filter change is activated.
Switching on, switching off, or
resetting theDisplay Active
AirClean Filter
Approximately every 6months, the Ac-
tive AirClean filter display will remind
you to change the Active AirClean filters
(see “Inserting the Active AirClean fil-
ters” in “Before first use”). Change Active
AirClean Filterwill appear in the display.
The first time the Active AirClean fil-
ters need to be changed, the display
will remind you automatically; the re-
minder does not need to be switched
on separately.
After the Active AirClean filters have
been changed, the Active AirClean filter
reminder display must be reset (see
“Resetting the Active AirClean filter dis-
play”).
If the Active AirClean filter reminder
display is not reset, it will appear again
after 7days.
If you do not require the Active Air-
Clean filter reminder display, it can be
switched off (see “Switching off
theDisplay Active AirClean Filter”).
New Active AirClean filters are avail-
able from Miele Technical Service,
your Miele dealer, or online.