spec sheet

Panel "B" Height
Width: 29 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Note: Finish back side of panels to insure appearance
Panel may extend above unit. This is not
considered in height calculation
Upper Maximum panel weight : 103.6 Pounds
Lower Panel Height: Use the following calculation:
Panel Height = HOM - 53 9/16 - TKH
HOM =Total height of machine. Can be adjusted to
match adjoining cabinets - typically 84"
HOM is adjustable between 83 1/2" - 85 3/8"
TKH =Toe-kick height (2" - 8 3/8")
Lower Maximum panel weight:22 Pounds
Upper Panel
TKH
HOM
Panel Height
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
Lower Panel
Upper Panel Notes
If
the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.
Find
the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Machine
Extended Panel Example:
Ajoining cabinet height: 87"
Height of machine: 84"
Difference: 3"
Extended panel height:56 5/16"
CUSTOM PANEL INSTALLATIONS
Panel "B" Height
Width: 29 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Note: Finish back side of panels to insure appearance
Panel may extend above unit. This is not
considered in height calculation
Upper Maximum panel weight : 103.6 Pounds
Lower Panel Height: Use the following calculation:
Panel Height = HOM - 53 9/16 - TKH
HOM =Total height of machine. Can be adjusted to
match adjoining cabinets - typically 84"
HOM is adjustable between 83 1/2" - 85 3/8"
TKH =Toe-kick height (2" - 8 3/8")
Lower Maximum panel weight:22 Pounds
Upper Panel
TKH
HOM
Panel Height
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the
cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets
.
Panel
size is determined in the following manner:
Lower Panel
Upper Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.
Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Machine
Extended Panel Example:
Ajoining cabinet height: 87"
Height of machine: 84"
Difference: 3"
Extended panel height:56 5/16"
104 lbs
HOM - 51 1/2” (1307 mm) - TKH
51 3/8” (1304 mm)
Minimum 35 3/4” (756 mm)
Minimum 3/4” (19 mm) outside frame
87” (2210 mm)
84” (2134 mm)
3” (76 mm)
54 1/2” (1379 mm)
Total height of machine. Can be adjusted
to match adjoining cabinets - typically 84”
(2133 mm).
HOM is adjustable between 84” -85 3/16”
(2134 mm - 2164 mm)
Lower Maximum panel weight: 22 lbs
Toe-kick height 2” - 8 3/8” (51 - 212 mm)
TKH =
Fully Integrated
36” MasterCool | KF 2901 Vi / KF 2911 Vi
Page 7 of 12