Installation instructions

Ventilation gaps
^
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the appliance's
energy consumption.
Metal grille at the back of the
appliance
The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.
^ When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
After cleaning
^
Replace all shelves and accessories
in the refrigerator section.
^
Place food back in the refrigerator
section, close the appliance doors,
insert the plug in the socket and
switch the appliance on.
^
Switch on the SuperFreeze function
so that the freezer can cool down
quickly.
^
Once the temperature in the freezer
has reached the required
temperature, place the food back in
the freezer.
^ Switch off SuperFreeze by pressing
the SuperFreeze button.
Cleaning and care
32