Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Super freeze and Dynamic cooling
- Temperature and door alarm
- Selecting further settings
- Storing food in the refrigerator section
- Adjusting the interior fittings (refrigerator section)
- Freezing and storing food
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior and accessories
- Cleaning the front of the appliance and the side panels
- Cleaning the ventilation gaps
- Cleaning the compressor and metal grille at the back of the appliance
- Cleaning the door seal
- After cleaning
- Replacing the charcoal filters
- Problem solving guide
- Noises
- Service
- Installation
Installation
*INSTALLATION*
63
Installing the refrigeration appliance
in a run of kitchen units
Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the
compressor will run more frequently
and for longer periods. This will
result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the
ventilation gaps given. The
ventilation gaps must not be covered
or blocked in any way.
Top box
Refrigeration appliance
Housing unit
Wall
* The appliance depth is increased by
approx. 35mm for refrigeration
appliances with wall spacers fitted.
The refrigeration appliance can be built
into a kitchen run and installed directly
next to a kitchen furniture housing unit.
The appliance front must protrude in
front of furniture fronts by at least
65mm. This enables the doors to be
opened and shut without being
obstructed. To match the height of the
rest of the kitchen, the refrigeration
appliance can be fitted with a suitable
top box.
When installed next to a wall, a
distance of at least 40mm must be
maintained on the hinge side between
the wall and the refrigeration
appliance.