Operating instructions/Installation instructions

Installation
-
I
N
S
T
A
L
L
A
T
I
O
N
-
60
Installing the refrigeration appliance
 Danger of injury and damage
due to the refrigeration appliance
tipping over.
There is an increased danger of
injury and damage if the refrigeration
appliance is installed by a single
person.
Two people are required for installing
the refrigeration appliance.
 Risk of damaging the floor.
Moving the refrigeration appliance
can cause damage to the floor.
Move the refrigeration appliance
carefully on floors that are sensitive
to scratching.
For easier installation there are
transport handles on the back at the
top and transport wheels underneath
the refrigeration appliance.
Tip: The refrigeration appliance must be
empty when it is installed.
 Prepare the refrigeration appliance for
installation as close as possible to its
intended installation location.
 Release the mains cable from the
back of the appliance.
 Remove the cable clip from the back
of the appliance.
 Move the refrigeration appliance
carefully to its intended installation
location.
 Position the refrigeration appliance
with the wall spacers (if used) or the
back close to the wall.
Aligning the appliance
 To align the appliance, adjust the
front feet using the spanner supplied
Levelling the appliance door
 Ensure that you unscrew the
adjustable foot from the lower
hinge plate with the enclosed
spanner until it sits on the floor. Then
unscrew the foot by a further ¼turn.