Operating instructions/Installation instructions
Installation
-
I
N
S
T
A
L
L
A
T
I
O
N
-
66
Undo the screws and remove
lower hinge plate together with
hinge pin, plastic disc and the
adjustable foot.
Unscrew the hinge pin together
with plastic disc, and screw back
into the opposite hole in the the hinge
plate.
Carefully remove cover and refit on
the opposite side.
Screw the lower hinge plate
together with hinge pin, plastic
disc and the adjustable foot in
on the opposite side.
Lower the lower door onto the hinge
pin .
Close the appliance door.
Fit hinge plate turned through 180°
into the bearing bush in the lower
door. Important! Make sure the
plastic disc is fitted back on the
hinge pin.
Then screw the hinge plate on
securely with screws.
Place the upper door onto the hinge
pin from above.
Fit hinge plate turned through 180°
into the bearing bush in the upper
door.
Then screw the hinge plate on
securely with screws.
Fit cover back onto the opposite
site. It will click into position.
Fit cover back onto the opposite
site. It will click into position.
Unscrew adjustable foot from the
lower hinge plate until it sits on the
floor.