Operating instructions/Installation instructions
Problem solving guide
46
Display warnings
Message Cause and remedy
The symbol lights up
in the display, the appli-
ance does not get cold,
although the controls
and the interior lighting
are working.
Demo mode is switched on. This allows the appli-
ance to be presented in the showroom without the
cooling system being switched on. Do not activate
this setting for domestic use.
Contact the Miele Service Department for informa-
tion on deactivating Demo mode.
The alarm symbol
and the temperature
display are flashing.
The temperature alarm has been activated (see
“Temperature and door alarm”). The temperature in
the freezer section has risen higher or fallen lower
than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too fre-
quently.
– A large quantity of fresh food has been placed
in the freezer without switching on the Super-
Freeze function.
– A prolonged power cut (mains outage) has oc-
curred.
Rectify the cause of the alarm.
The alarm will stop and the alarm symbol will go
out when the temperature reaches the correct level
again.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
“F0toF9” appears in
the display.
There is a fault.
Call the Miele Service Department.