Operating instructions/Installation instructions

Installation
*INSTALLATION*
56
Weight of the furniture door
 If the furniture door panel is too
heavy, this can cause damage.
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges.
This can cause subsequent func-
tional problems.
Before fitting furniture doors, ensure
that the weight of the door does not ex-
ceed the maximum permitted:
Appliance Upper
door in
kg
Lower
door in
kg
KFN 37232 iD,
KFNS 37232 iD
17 12
When fitting large or divided furniture
doors, an extra fitting kit or set of fix-
ing brackets should be used. These
are available to order from the Miele
Customer Service department or deal-
ers.
Before installing the appliance
 Take the accessory pack which in-
cludes installation parts and other ac-
cessories out of the appliance and re-
move the packaging strap holding the
door in place.
 Do not remove the following from
the back of the appliance:
- The spacers (depending on model)
These ensure the gap required
between the back of the appliance
and the wall is maintained.
- The bags (depending on model) loc-
ated inside the metal grille (heat ex-
changer).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and are not
dangerous.
 Remove the cable clip from the back
of the appliance.