Operating instructions/Installation instructions

Information for dealers
71
Switching off Demo mode
The symbol is lit up in the display.
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the symbol
flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes.
 Touch the OK sensor to confirm your
selection.
1 flashes in the display (means: Demo
mode is switched on) and the symbol
lights up.
 Touch the  or  sensor until 0
appears (means: Demo mode is
switched off).
 Touch the OK sensor to confirm your
selection.
The selected setting is applied, the
symbol flashes.
 Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.
Demo mode is switched off, the
symbol goes out.