Operating instructions/Installation instructions
Installation
*INSTALLATION*
100
Close the covers.
Push the appliance two thirds of the
way into the building-in niche. When
pushing the appliance into its niche,
make sure that the mains cable does
not get trapped.
Tip: To help you push it into position, tie
a piece of string around the plug to
“lengthen” the power cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the
appliance is in the unit.
With 16mm thick unit walls only:
Clip spacers and on the right-
hand side of the hinges.
Open both appliance doors.