Operating instructions/Installation instructions

Installation
*INSTALLATION*
103
Securing the refrigeration appliance
in the niche
 Press the appliance against the side
of the housing unit on the hinge side.
 Screw the chipboard screws
through the hinge plates in the order
shown to secure the appliance to the
housing unit.
 Push the loose fixing brackets against
the housing unit wall.
 Secure the fixing bracket to the
housing unit side wall with the
screw.
Tip: Pre-drill the hole.
The appliance must not pull back
into the unit, as otherwise the gap of
42mm will not be maintained all the
way round.
Using your thumb, push the
protruding bracket towards the
housing unit wall whilst tightening
the screws.
 Secure the fixing bracket to the
housing unit side wall with the
screws.
Tip: Pre-drill the holes.
 Re-tighten screws and .