Operating instructions/Installation instructions

Installation
*INSTALLATION*
105
Fitting the furniture doors
The upper edge of the appliance
furniture doors should be aligned with
the height of the furniture doors of the
adjacent kitchen units.
The furniture doors must be mounted
free of tension.
The following chapter describes the
installation of furniture doors with a
furniture front of at least 16-19mm
thickness.
Carry out the following steps on both
doors.
 The distance between the appliance
door and the fixing bracket is set to
8mm at the factory. Check this
distance and adjust it if necessary.
 Push the fitting aids up to the
height of the furniture door: the lower
edge X of the fitting aids must be at
the same height as the upper edge of
the furniture door being fitted (see
in diagram).
Tip: Push up the fitting aids with the
furniture front until they are at the same
height as the doors of adjacent kitchen
units.
 Undo the nuts and take the fixing
bracket off together with the fitting
aids.