Operating instructions/Installation instructions

Adjusting the interior fittings
45
Adjusting the door shelf/bottle
shelf
Tip: Only move the appliance door
shelves/bottle shelves when they are
empty.
 Push the door shelf/bottle shelf
upwards, then remove it by pulling it
forwards.
 Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Moving the adjustable shelf/
adjustable shelf with lighting
By adjusting the position of the
adjustable shelf with lighting in the
refrigerator section, you can change the
illumination in this section according to
your needs.
Stoppers prevent the shelves from
being dislodged by mistake.
 The shelves can be adjusted
according to the height of the
refrigerated goods:
1. Lift it upwards slightly at the front.
2. Pull it forwards a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
 Push the shelf in until it clicks into
position.
The raised edge on the protective strip
at the back must face upwards to
prevent food from touching the back
of the appliance and freezing to it.
Adjusting the bottle rack
The bottle rack can be placed at
different positions in the appliance.
 Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to
prevent bottles from touching the back
of the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.