Operating instructions/Installation instructions

Making ice cubes
55
However, you can also use the cooled
water in the water container at any time.
The water container holds approx. 1
litre of water.
Filling the water container
 Switch the appliance on.
 Pull the water container forwards to
remove it.
 Clean it thoroughly with water to
remove any dust etc.
 Fill the container up to the marker
with fresh, cold drinking water.
 Place the filled water container back
into its holder and push it all the way
in.
Make sure that the water container
has locked into position and is sitting
correctly in its niche.
Switching the ice-cube maker
on and off
Make sure that the ice-cube drawer is
empty before switching on the ice-
cube maker.
 Touch the settings button.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the buttons for setting the
temperature (or ) repeatedly until
the the ice-cube maker symbol
flashes in the display.
 Touch the OK button to confirm your
selection.
 Use the  and buttons to set the
ice-cube maker:
0: ice-cube maker is switched off
1: ice-cube maker is switched on
 Touch the OK button to confirm your
selection.
The selected setting is applied.
 Touch the settings button to leave
settings mode or
 close the appliance door.
Otherwise, the appliance will switch to
normal operation after approximately
one minute.