Operating instructions/Installation instructions

Problem solving guide
72
Display warnings
Message Cause and remedy
The  symbol lights up
in the display. You can-
not switch the appli-
ance off.
The safety lock has been activated.
 Completely deactivate the safety lock (see
“Selecting further settings – Activating and
deactivating the safety lock”).
The alarm symbol
and the sensor for one
of the sections light up
in the display, and an
alarm also sounds.
The door alarm has been activated.
 Close the appliance door. The alarm symbol
will go out and the alarm will stop.
The alarm symbol
flashes in the display
together with the
sensor for the freezer
section. An alarm will
also sound.
The temperature alarm has been activated.
The temperature in the freezer section has risen
above or fallen below the temperature which has
been set.
Possible reasons for this include:
– The appliance door has been opened too
frequently.
– A large quantity of fresh food has been placed
in the freezer without switching on the
SuperFreeze function.
– A prolonged power cut (mains outage) has
occurred.
 Rectify the cause of the alarm.
The alarm symbol goes out and the sensor for the
freezer section lights up again constantly. The alarm
will stop.
 Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.