Operating instructions/Installation instructions

Information for dealers
83
Demo mode 
The appliance can be demonstrated in
the showroom or at exhibitions in
“Demo mode”. In this mode the control
panel and interior lighting are active but
the compressor remains switched off,
so that the appliance does not cool
down.
Switching on demo mode
 Switch the appliance off by touching
the On/Off sensor.
If this does not work, the safety lock
is activated.
The temperature display will go out and
the mains connection symbol will
appear.
 Place your finger on the sensor,
and leave it there.
 At the same time, briefly touch the
On/Off sensor (without letting go of
the sensor).
 Leave your finger on the sensor
until the symbol appears in the
display.
 Then release the sensor.
Demo mode is turned on and the
symbol is illuminated in the display.