Operating instructions/Installation instructions
Installation
*INSTALLATION*
103
Important for furniture with door
fittings (e.g. stubs, seals, etc.).
Take the dimensions of the fittings
into account.
Check to make sure there is a gap all
round of 42mm to the front edges of
the door fittings.
Pull the refrigeration appliance
forwards by the appropriate
dimension.
Tip: If possible, remove the door fittings
and push the refrigeration appliance
into the niche until all fixing brackets at
the top and bottom are touching the
front edge of the housing unit side wall.
Align the appliance on both sides by
altering the adjustable feet using the
spanner supplied.
Securing the refrigeration appliance
in the niche
Press the appliance against the side
of the housing unit on the hinge side.
Screw the chipboard screws
through the hinge plates in the order
shown to secure the appliance to the
housing unit.