Operating instructions/Installation instructions

Installation
*INSTALLATION*
104
 Push the loose fixing brackets against
the housing unit wall.
 Secure the fixing bracket to the
housing unit side wall with the
screw.
Tip: Pre-drill the hole.
The appliance must not pull back
into the unit, as otherwise the gap of
42mm will not be maintained all the
way round.
Using your thumb, push the
protruding bracket towards the
housing unit wall whilst tightening
the screws.
 Secure the fixing bracket to the
housing unit side wall with the
screws.
Tip: Pre-drill the holes.
 Re-tighten screws and .
 Snap off any protruding ends from
the fixing brackets. They are no
longer required and can be disposed
of.
 Replace covers and on the
fixing brackets.