Operating instructions/Installation instructions

Making ice cubes
57
An ice-cube tray, in which the ice
cubes are produced, is integrated in the
ice-cube maker.
The ice-cube tray automatically empties
into the drawer as soon as ice cubes
are produced. Once a certain fill level
has been reached, the automatic
production of ice cubes stops. The
drawer will not fill up to the top edge.
The ice-cube maker can be turned off
independently of the freezer if you do
not want to make any ice cubes.
If the ice-cube maker is turned off, the
ice-cube drawer can be used as an
extra drawer for freezing fresh food
and storing frozen food.
Switching the ice-cube maker
on and off
Make sure that the ice-cube drawer is
empty before switching on the ice-
cube maker.
 Touch the settings button.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the buttons for setting the
temperature (or ) repeatedly until
the the ice-cube maker symbol
flashes in the display.
 Touch the OK button to confirm your
selection.
 Use the  and buttons to set the
ice-cube maker:
0: ice-cube maker is switched off
1: ice-cube maker is switched on
 Touch the OK button to confirm your
selection.
The selected setting is applied.
 Touch the settings button to leave
settings mode or
 close the appliance door.
Otherwise, the appliance will switch to
normal operation after approximately
one minute.