Operating instructions/Installation instructions
Problem solving guide
76
Problems with the ice cube maker
Problem Cause and remedy
The ice cube maker will
not switch on.
The appliance is not connected to the power supply
or is not switched on.
Reconnect to the mains and switch the appliance
back on.
The ice-cube maker is
not producing any ice
cubes.
The refrigeration appliance or the ice-cube maker is
not turned on.
Switch on the refrigeration appliance and the ice-
cube maker.
The water supply is not open or has not been vented.
Open the water supply.
Check whether the water supply has been vented.
The drawer of the ice-cube maker is not closed
properly.
Push the drawer all the way in.
The appliance door has been opened too frequently,
causing the compressor to turn on more often and
the ice-cube maker has iced up.
Only open the appliance door when necessary and
for as short a time as possible.
The temperature in the freezer section is too high.
Select a lower temperature.
The water connection pressure is too low.
Check that the water connection is between
150kPa and 600kPa (1.5bar and 6bar).
Remember that it can take up to 24hours to
produce the first ice cubes.
The ice cube maker is
only producing small
ice cubes.
The size of the ice cubes produced depends on the
volume of the water intake which you can set
according to your requirements
Lengthen the water intake time for the ice cube
maker.