Operation Manual

Installing the appliance
106
 Drill holes in the furniture door and
fit screws. Make sure the two
metal edges are aligned (Symbol//).
 Close the appliance door and the fur-
niture door.
- Depth adjustment (Z)
 Loosen screws at the top of the
appliance door, and screw on the
fixing bracket at the bottom. By mov-
ing the furniture door, create a gap of
2mm between the furniture door and
the housing unit.
 Tighten all screws again.
 Replace top cover, and click it into
place.
 Replace side covers, making sure
you hear them click into place.