Operation Manual

Switching on and off
21
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
A tone will sound each time a sensor is
touched. You can deactivate this, if you
wish (see "Selecting further settings -
Audible tones").
Switching on
When the appliance is connected to the
electrical supply, the mains connection
symbol  will appear in the display
after a short while.
 Touch the On/Off sensor.
The mains connection symbol goes
out and the appliance starts to cool
down.
The sensors for the refrigerator and
freezer sections will appear in the con-
trol panel:
The refrigerator section sensor is high-
lighted in yellow and the current tem-
perature in the refrigerator appears in
the display.
When the door is opened, the interior
lighting comes on and the LED lighting
on the adjustable shelves becomes
brighter until it reaches its maximum
brightness.
When the appliance is switched on for
the first time, the sensors for the freezer
section and the alarm symbol will
flash until the set temperature is
reached.
When the set temperature is reached,
the sensor for the freezer section lights
up constantly and the alarm symbol
goes out.
To enable the temperature to get suf-
ficiently cold inside the appliance, al-
low the appliance to run for a few
hours before placing food in it. Do
not place food in the freezer section
until the temperature is at least
-18°C.