Operation Manual

Cleaning and care
62
After cleaning
 Replace all shelves and accessories
in the appliance.
The left-hand shelf supports have
metal discs (contacts) which supply
power to the LED lighting.
Make sure that the contacts are clean
and dry before inserting the shelves
with LED lighting.
Push the shelf in until it clicks into po-
sition, as otherwise the lighting will not
work.
 Reconnect to the mains and switch
the appliance back on.
 Switch on the Super freeze function
for a while so that the freezer section
can cool down quickly.
 Switch on the Super cool function for
a while so that the appliance can cool
down quickly.
 Place food in the refrigerator section
and close the door.
 Once the temperature in the freezer
section has reached the required
temperature, place the food back in
the freezer drawers and put them
back in the freezer section.
 When the temperature in the freezer
section is a constant -18°C or colder
press the Super freeze sensor to
switch the Super freeze function off.