Operation Manual

Problem solving guide
67
Display warnings
Message Cause and remedy
When the ice cube
maker is switched on,
thesymbol flashes in
the display and the in-
dicator light on the ice
cube maker flashes.
The water supply is turned off.
 Turn on the water supply.
The ice maker
andalarm  symbols
are flashing in the dis-
play. The indicator light
on the ice cube maker
is also flashing.
The is a fault with the ice cube maker.
 Call the Miele Service Department.
The mains connection
symbol, appears
and the alarm sounds.
The temperature display
will also show the
warmest temperature
recorded in the freezer
during an interruption to
the power supply or a
power cut.
The temperature in the appliance in the previous days
or hours has risen too high because of a power cut or
interruption to the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
 Touch the alarm off sensor.
The warmest temperature display will go out. The dis-
play will then revert to showing the current temperat-
ure in the freezer.
 Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if so, use it as soon as pos-
sible. Defrosted food may only be re-frozen after it
has been cooked.