Operation Manual

Mains water connection
80
Notes on connection to the
water supply
Connection to the mains water sup-
ply should only be carried out by a
qualified and competent person.
Disconnect the appliance from the
mains electricity supply before con-
necting it to the mains water supply.
Close the stopcock before connect-
ing the water intake hose to the ice
cube maker.
The water quality must conform to
the requirements for drinking water in
the country the appliance is being in-
stalled in.
This appliance meets the requirements
of IEC 61770 and EN 61770.
Connection to the household water
supply must comply with current na-
tional and local safety regulations in
the country in which the appliance is
being installed.
All items used for connecting the ap-
pliance to the mains water supply
must comply with current national
and local safety regulations in the
country in which the appliance is be-
ing installed
The appliance is only suitable
for connection to a cold water
supply, which
– is connected directly to the fresh wa-
ter supply, to guarantee circulation of
water throughout the system.
Avoid laying the water hose in such a
way that water can collect in it, as
this can affect the taste of the water
or the ice cubes.
– sustains operating pressure.
– complies with hygiene regulations.
The water pressure (flow rate) must be
between andbar.
The stainless steel hose supplied ism
long and must not be lengthened.