Operation Manual

Installation
84
This appliance must be built in, oth-
erwise it could tip up.
Location
This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as an oven or a radiator.
The higher the ambient temperature of
the room, the more energy the appli-
ance requires to operate. The appliance
should be installed in a dry, well ventil-
ated room.
When installing the appliance, please
note:
– The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
– The plug and cable must not touch
the rear of the appliance as they
could be damaged by vibrations from
the appliance.
– Do not plug in other appliances be-
hind this appliance.
 In environments with high hu-
midity condensation can build up on
the exterior of the appliance.
This can cause corrosion of the ap-
pliance walls.
For prevention, it is advisable to in-
stall the appliance with sufficient
ventilation in a dry and/or air condi-
tioned room.
Please ensure that the appliance
doors close properly, the ventilation
gaps are not covered over and the
appliance is installed in accordance
with these instructions.