User manual

Cleaning and care
78
Dismantling the adjustable shelf with
pivotable glass shelf (FlexiTray)
 Place the adjustable shelf with pivot-
able glass shelf on a worktop covered
with a soft material (e.g. a tea towel).
 Bring the tray to the front. Use the
opening to lift the glass shelf from un-
derneath and remove it.
 Move the tray back to its original pos-
ition resting on the adjustable shelf.
The tray can only be detached from
the adjustable shelf once it has been
returned to its original position and is
resting on the adjustable shelf. The
fastener must be sitting in the circu-
lar recess at the end of the runner
guide.
 Take a firm hold of the top right of the
bottom adjustable shelf and pull the
tray firmly off the adjustable shelf.
The fastener on the tray comes loose
from the circular recess at the end of
the runner guide.
You can now dismantle all the parts and
clean them.
Underneath the plastic shelf, there is a
glass panel which is held in place with
retainers on the outer edge of the
adjustable shelf.
The glass panel can also be removed
for cleaning as described below:
 Move the shelf so that the stainless
steel trim is at the back and the front
edge hangs over the worktop slightly.