User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Start display
- Adjusting the interior fittings
- Using the door shelf fine adjustment
- Moving the door shelf/bottle shelf
- Clipping the egg trays on
- Adjusting or removing the bottle holder
- Moving the adjustable shelf/adjustable shelf with lighting
- Moving the pivotable glass shelf (FlexiTray)
- Using the bottle rack in the dividing plate
- Removing and reinserting the organisation box
- Inserting the adapters for the baking tray
- Moving the charcoal filters
- When storing very strong smelling food (e.g. very ripe cheese):
- Optional accessories
- Switching on and off
- The correct temperature
- Using Super cool and Super freeze
- Selecting further settings
- Explanation of the different settings
- Party mode
- Holiday mode
- Switching the lock function / on
- Deactivating the lock function / temporarily
- Switching the lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and buzzers /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Charcoal filter change indicator
- Cleaning mode
- Explanation of the different settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Active zone
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the inside of the appliance
- Cleaning accessories by hand or in the dishwasher
- Removing, dismantling and cleaning accessories
- Removing the door shelf with fine adjustment
- Dismantling the door shelf/bottle shelf
- Dismantling the adjustable shelf/adjustable shelf with lighting
- Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Assembling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Removing the drawers from the fridge zone
- Replacing the drawers
- Removing and dismantling the water container for the humidifier
- Removing the dividing plate and bottle rack
- Removing the compartment cover
- Removing the drawers and glass shelves from the freezer section
- Removing the drawer on telescopic rails
- Replacing the drawer
- Removing the bottom drawer
- Removing the glass shelf
- Removing the telescopic rails from the glass shelf
- Replacing the charcoal filters (optional accessories)
- Cleaning the ice cube tray
- Cleaning the door seal
- Cleaning the ventilation gaps
- After cleaning
- Problem solving guide
- Noises
- Service
Installation
*INSTALLATION*
24
The water connection pressure needs
to be between 150kPa and 600kPa
(1.5bar and 6bar).
Use fresh water to ensure that the
quality of the ice cubes remains high.
Connect the stainless steel hose to
the mains water supply and avoid
connection to a water supply in
which the water might stagnate.
Only use the hose supplied. The
hose must not be shortened, exten-
ded or replaced by a different hose.
The hose must only be replaced by
an original Miele spare part. The
food-grade hose is available to order
from the Miele webshop, from the
Miele Customer Service Department
or from your local Miele dealer.
A stopcock must be provided between
the hose and the mains water connec-
tion to ensure that the water supply can
be cut off if necessary.
Make sure that the stopcock remains
accessible after the appliance has
been installed.
Water supply
Ensure that the connections are tight
and leak-proof.
Risk of damage to the hose.
The water supply from the stopcock
to the ice cube maker has been inter-
rupted.
Do not bend or damage the hose.
A stopcock with a metric R3/4thread
must be incorporated when connect-
ing to the water supply.
The solenoid valve is located at the
back of the refrigeration appliance on
the bottom right. It also has a metric
R3/4thread.
–Connecting the hose to the refriger-
ation appliance
Pull the cover off the thread of the
solenoid valve.
Position the angled end of the
hose horizontally on the holder
and hold onto it securely.
Screw the nut onto the thread by
hand until it is securely in place.