User manual

The correct temperature
42
Temperature display
In normal operation, the temperature
display shows the current average
refrigerator section temperature and
the maximum freezer section tem-
perature.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature on the display.
Setting the temperature in the
refrigerator/freezer sections
 Touch the temperature display for the
section you want to change.
 Swipe left or right until the temperat-
ure you want is shown in the middle.
 Tap on the temperature you want to
confirm.
The temperature display will then
change back to the current refrigeration
and freezer temperature in the refrigera-
tion appliance.
Possible temperature settings
- Refrigerator section: 3to9°C
- Freezer section: -15to-26°C
Adjusting the PerfectFresh Active
zone temperature
The temperature in the PerfectFresh
Active zone is automatically maintained
between 0and3°C.
However, if you would like it to be
warmer or colder, e.g. when storing
fish, you can adjust the temperature
slightly in increments.
 Tap.
 Swipe left or right until is shown in
the middle.
 Tap.
 Swipe left or right until the setting you
want (1: lowest temperature; 9:
highest temperature) is shown in the
middle.
 Tap on the setting you want to con-
firm.
The default setting for the temperat-
ure is5.
Under certain circumstances, a set-
ting from1 to4 can cause negative
temperatures to be reached. This can
cause food to freeze.
Check the temperature setting.