User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Start display
- Adjusting the interior fittings
- Using the door shelf fine adjustment
- Moving the door shelf/bottle shelf
- Clipping the egg trays on
- Adjusting or removing the bottle holder
- Moving the adjustable shelf/adjustable shelf with lighting
- Moving the pivotable glass shelf (FlexiTray)
- Using the bottle rack in the dividing plate
- Removing and reinserting the organisation box
- Inserting the adapters for the baking tray
- Moving the charcoal filters
- When storing very strong smelling food (e.g. very ripe cheese):
- Optional accessories
- Switching on and off
- The correct temperature
- Using Super cool and Super freeze
- Selecting further settings
- Explanation of the different settings
- Party mode
- Holiday mode
- Switching the lock function / on
- Deactivating the lock function / temporarily
- Switching the lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and buzzers /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Charcoal filter change indicator
- Cleaning mode
- Explanation of the different settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Active zone
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the inside of the appliance
- Cleaning accessories by hand or in the dishwasher
- Removing, dismantling and cleaning accessories
- Removing the door shelf with fine adjustment
- Dismantling the door shelf/bottle shelf
- Dismantling the adjustable shelf/adjustable shelf with lighting
- Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Assembling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Removing the drawers from the fridge zone
- Replacing the drawers
- Removing and dismantling the water container for the humidifier
- Removing the dividing plate and bottle rack
- Removing the compartment cover
- Removing the drawers and glass shelves from the freezer section
- Removing the drawer on telescopic rails
- Replacing the drawer
- Removing the bottom drawer
- Removing the glass shelf
- Removing the telescopic rails from the glass shelf
- Replacing the charcoal filters (optional accessories)
- Cleaning the ice cube tray
- Cleaning the door seal
- Cleaning the ventilation gaps
- After cleaning
- Problem solving guide
- Noises
- Service
Cleaning and care
74
- Shelves and bottle shelves in the ap-
pliance door (without stainless steel
trim)
- Adjustable shelves (without the trim
or printing)
- The glass shelves (without trim)
- The partition for the ice cube drawer
- The 2pieces that make up the water
container for the humidifier
- The organisation box
- The adapters for the baking tray
- The holder for the charcoal filter
(available as an optional accessory)
Removing, dismantling and
cleaning accessories
Removing the door shelf with fine ad-
justment
Hold the door shelf in both hands,
press the grey buttons on both sides
under it and slide it up off the guide
rails.
After cleaning, slide the door shelf
back onto the guide rails from above.
Dismantling the door shelf/bottle
shelf
Remove the stainless steel trim before
cleaning the door shelf/bottle rack in a
dishwasher.
To remove the stainless steel trim, pro-
ceed as follows:
Place the door shelf/bottle rack on
the worktop.
Press the latch out of the recess. The
entire section of stainless steel trim
will now come off the shelf.
After cleaning, reattach the stainless
steel trim to the shelf by following the
same procedure in reverse.