Installation instructions

~
Safe operation of the appliance is
only assured if it has been installed and
connected in accordance with these
operating and installation instructions.
~
This appliance may only be used in
mobile installations such as ships, etc.
if a risk assessment of the installation
has been carried out by a suitably
qualified engineer.
~
Installation work, maintenance and
repairs may only be carried out by
suitably qualified and competent
persons in accordance with national
and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held liable.
Ensure current is not supplied to the
appliance until after maintenance or
repair work has been carried out.
~
The manufacturer cannot be held
liable for damage caused by a faulty
connection to the mains water supply.
~
Connection to the mains water
supply and any repairs to the ice cube
maker must only be carried out by a
suitably qualified and competent
person.
~
The ice cube maker is not suitable
for connection to a hot water supply.
~
Before making plumbing
connections, ensure the appliance is
disconnected from the mains electricity
supply.
~
The appliance is only completely
isolated from the electricity supply
when:
it has been switched off at the wall
socket and the plug has been
withdrawn.
the fuse from the fused spur
connection unit has been withdrawn,
or
the mains fuse has been withdrawn,
or the screw-out fuse removed (in
countries where this is applicable).
~
Do not connect the appliance to the
mains electricity supply by an extension
lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
~
In countries where there are areas
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
Warning and Safety instructions
10