User's Manual

Table Of Contents
Switching on and off
21
Touch display
The touch display can be scratched
by pointed or sharp objects, e.g.
pens.
Only touch the display with your
fingers.
If your fingers are cold, the touch
display may not react.
Switching the appliance on
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for approx.
2hours before placing food in it.
Do not place food in the freezer until
the temperature is at least -18°C.
Standby
Touch briefly.
The welcome message
Miele - Willkommen will appear in the
display for approx. 3seconds.
If this does not happen and
appears in the display, the safety lock
is activated (see “Selecting further
settings” - “Activating or deactivating
the safety lock” - “Deactivating the
safety lock temporarily”).
°C
3
-18
°C
Start screen
The display changes to the start screen.
The interior lighting comes on and
becomes brighter until it reaches its
maximum brightness. The appliance is
now switched on and will start to cool.
The appliance will gradually reach the
pre-set temperatures:
Temperature in the refrigerator
section= 3°C
Temperature in the freezer section=
-18°C