User's Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Before using for the first time
- Switching on and off
- The correct temperature
- Using SuperFreeze, SuperCool and DynaCool
- Temperature and door alarm
- Selecting further settings
- Settings overview
- Selecting further settings
- Explanation of the different settings
- Switching Party mode on/off
- Switching Holiday mode on/off
- Using the minute minder (QuickCool timer)
- – Setting the minute minder
- – When the minute minder duration has elapsed
- – Altering the minute minder
- – Cancelling the minute minder
- Activating or deactivating the safety lock /
- – Deactivating the safety lock temporarily
- – Switching off the safety lock
- Switching the appliance off
- Switching Sabbath mode on/off
- – Switching Sabbath mode on
- – Switching Sabbath mode off prematurely
- Setting the time before the door alarm is triggered
- Switching the keypad tone / on/off
- Setting the volume/Switching alarms and audible tones on/off
- Setting the display brightness
- Setting the temperature unit /
- Switching Demo mode off
- Resetting factory settings
- Accessing information
- – Displaying licence agreements
- Reminder to replace charcoal filter
- Using the refrigerator efficiently
- Adjusting the interior fittings (refrigerator section)
- Freezing and storing food
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the appliance for cleaning
- Cleaning the interior and accessories
- Cleaning the front of the appliance and the side panels
- Cleaning the ventilation gaps
- Cleaning the compressor and metal grille at the back of the appliance
- Cleaning the door seals
- Starting up the appliance after cleaning
- Replacing the charcoal filters
- Problem solving guide
- Noises
- Service
- Electrical connection
- Installation
- Changing the door hinging
- Aligning the appliance doors
Selecting further settings
34
Selecting further settings
In Settings mode, certain settings
can be adjusted and functions selected,
allowing you to adjust the refrigeration
appliance to suit your requirements.
See the following pages for more
information on these settings.
The door alarm and other warnings
are automatically supressed when you
are in Settings mode. No symbols will
be displayed and no alarm will sound.
Exception: If there is an appliance fault
(F+numbers), Settings mode will be
exited automatically. The fault code
will be shown in the display and an
alarm will sound (see “Problem solving
guide – Messages in the display”).
Selecting the required setting
°C
3
-18
°C
Start screen
Touch .
Settings mode
Scroll left or right using
theorarrow sensors.
The symbol for the selectable setting
appears in the middle of the display.
The symbols for the next available
settings are visible in the background to
the right and left, but cannot be
selected.
Touch the symbol for the setting you
want (see “Settings overview”).
Depending on the setting selected,
there are two options:
1. You reach a sub-menu for selecting
further options or for entering values.
2. You select the setting directly. The
symbol turns orange and this
confirms your selection. If the symbol
is white, the function has not been
activated.