User's Manual

Table Of Contents
Problem solving guide
63
Message Possible cause and remedy
lights up red in the
freezer section
temperature display and
an alarm sounds.
The temperature alarm has been activated (see
“Temperature and door alarm”). The temperature in
the freezer section has risen higher or fallen lower
than the temperature set.
Possible reasons for this include:
The appliance door has been opened too
frequently.
A large quantity of fresh food has been placed in
the freezer without switching on the SuperFreeze
function.
A prolonged power cut (mains outage) has
occurred.
The appliance has a fault.
Touch
in the display.
The alarm message is confirmed:
goes out and
the alarm stops.
The start screen appears in the display: the warmest
temperature recorded in the freezer section will flash
in the display for about 1minute. Then the current
temperature in the freezer will be displayed.
You can exit the flashing temperature display early:
Touch the temperature display for the freezer
section.
The warmest temperature display will disappear. The
display will revert to showing the current temperature
in the freezer.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be refrozen after it has been cooked.