Operating Instructions Bottom-mount Unit To prevent accidents and machine damage, read these instructions before installation or use. en - US/CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 5 Caring for the environment .............................................................................. 15 Installation.......................................................................................................... Installation location ............................................................................................. Side-by-side combinations ......................................
Contents Switching on and off ......................................................................................... Before using for the first time .............................................................................. Connecting the appliance .............................................................................. Filling and inserting the water container for the humidifier ............................ Switching on the appliance ............................................................
Contents Humidity-controlled compartment ..................................................................... 63 Humidifier ................................................................................................... 65 Dry compartment ................................................................................................ 66 Freezing and storing food................................................................................. What happens when you freeze fresh food?...................
IMPORTANT SAFETY INSTRUCTIONS This refrigeration appliance complies with current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Please read the operating and installation instructions carefully before using the refrigeration appliance for the first time. They contain important information on safety, installation, use, and maintenance. This is to protect yourself from injury, and from damaging your refrigeration appliance.
IMPORTANT SAFETY INSTRUCTIONS This appliance is intended for domestic use only for cooling and storing food and drink as well as for storing deep frozen food, freezing fresh food and for making ice. Any other usage is not supported by the manufacturer and could be dangerous. This refrigeration appliance is not suitable for storing and keeping cool medicines, blood plasma, laboratory preparations, or other similar substances or products that are subject to the Medical Device Directive.
IMPORTANT SAFETY INSTRUCTIONS Ensure that any packing material is disposed of safely and kept out of the reach of children. DANGER of suffocation! Technical safety The coolant circuit has been checked for leaks. The refrigeration appliance complies with statutory and regulatory requirements. The symbol is located on the compressor and indicates the danger of inflammable materials. Do not remove the label.
IMPORTANT SAFETY INSTRUCTIONS The more coolant there is in a refrigeration appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of a combustible gas/ air mixture building up. For every 11 g of coolant, at least 1 m3 of room space is required. The amount of coolant in the refrigeration appliance is stated on the data plate inside the appliance.
IMPORTANT SAFETY INSTRUCTIONS If moisture gets into electrical components or into the power cord, it could cause a short circuit. Therefore, do not operate the machine in areas where there may be moisture or splashing water (e.g., garages, laundry rooms). This appliance must not be installed and operated in mobile installations (e.g. on a ship). Do not use a damaged appliance. It could be dangerous. Check the appliance for visible signs of damage.
IMPORTANT SAFETY INSTRUCTIONS Faulty components must only be replaced by genuine Miele replacement parts. Miele can only guarantee the safety standards of the appliance when Miele replacement parts are used. This refrigeration appliance is supplied with a special bulb to cope with particular conditions (e.g., temperature, moisture, chemical resistance, abrasion resistance, and vibration). This bulb must only be used for the purpose for which it is intended. The bulb is not suitable for room lighting.
IMPORTANT SAFETY INSTRUCTIONS If storing food which contains a lot of fat or oil in the appliance, make sure that it does not come into contact with plastic components as this could cause stress cracks or break the plastic. Risk of fire and explosion. Do not store any explosive materials or products containing flammable propellants (e.g., spray cans) in the appliance. Electrical components can cause flammable mixes of gases to ignite. WARNING! Risk of explosion.
IMPORTANT SAFETY INSTRUCTIONS When eating stored food, there is a danger of food poisoning. Storage times will depend on several factors, including the freshness and quality of the food, as well as the temperature at which it is stored. Observe the manufacturer's “use-by” dates and storage instructions. Accessories and parts Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become invalid.
IMPORTANT SAFETY INSTRUCTIONS Do not use defrosting sprays or de-icers, as they could contain substances which could damage the plastic parts or which might cause the build-up of gases and pose a danger to health. Transport To avoid damage to the appliance, always transport it upright and in its packaging. Risk of injury and damage. The refrigeration appliance is very heavy and must be transported by two people. Disposal of your old appliance DANGER.
IMPORTANT SAFETY INSTRUCTIONS Splashes of coolant can cause damage to the eyes. Be careful not to damage any part of the pipework while awaiting disposal, e.g. by - puncturing the coolant channels in the evaporator, - kinking any pipework, - scratching the surface coating. Symbol on the compressor (depending on model) This information is only relevant for recycling. There is no risk during normal operation. The oil in the compressor can be fatal if swallowed or if it penetrates the airways.
Caring for the environment Disposal of packaging material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Return the packaging to your dealer.
*INSTALLATION* Installation Installation location WARNING! Risk of damage and injury due to the refrigeration appliance tipping over. This refrigeration appliance is very heavy and can tip forward when the door is open. Keep the appliance door(s) closed until the refrigeration appliance has been built in. The refrigeration appliance must be secured in its buildingin niche in accordance with the operating and installation instructions. Fire hazard and risk of damage from appliances that give off heat.
*INSTALLATION* Installation Risk of damage due to high hu- Climate class midity. In environments with high humidity, condensation can build up on external refrigeration-appliance panels. This condensate can cause corrosion on external appliance panels. Install the refrigeration appliance in a dry and/or air-conditioned room with sufficient ventilation.
*INSTALLATION* Installation Ventilation WARNING! Fire hazard and risk of damage due to insufficient ventilation. If the refrigeration appliance is not ventilated sufficiently, the compressor will run more frequently and for longer periods. This causes increased energy consumption and an increased compressor operating temperature, which can result in damage to the compressor. Please ensure that there is adequate ventilation around the refrigeration appliance.
*INSTALLATION* Installation Cabinet doors Calculation of cabinet door size An upper cabinet door for the refrigerator section and a lower cabinet door for the freezer section are required. The width of the cabinet door depends on the style of the kitchen and the gap between the unit door panels. The cabinet doors must be at least 5/8“ (16 mm) / 3/4” (19 mm) thick.
*INSTALLATION* Installation Gap X [in (mm)] for different edge radii B Adjoining side wall R0 R1.2 R2 R3 ≥5/8"3/4" (16–19) min. 1/8" (3) 13/16" (20) 3/16" 3/16" 3/16" (5) (4) (4) 13/16" (21) 3/16" 3/16" 3/16" 3/16" (5.5) (5) (4.5) (4) 7/8" (22) 1/4" (6.5) 1/8" (3.5) 3/16" 3/16" (5.
*INSTALLATION* Installation Cabinet door dimensions min /max height of freezer section cabinet door min /max height of refrigerator section cabinet door Refrigerator section cabinet door Freezer section cabinet door Refrigerator section appliance door Freezer section appliance door Fitted unit cover panel Fitted unit cabinet base 21
*INSTALLATION* Installation A 27 3/8" (695 mm) B 9/16" (15 mm) C 24 3/4" (629 mm) D 38 15/16" (989 mm) E 70 3/8" (1788 mm) F approx. 1/8" (3 mm) G1-4 3/4" (19 mm) Calculating the height of the cabinet doors These examples are based on the following measurements, which may vary depending on the design of the kitchen: - The horizontal gap between cabinet doors and is F = approx. 1/8" (3 mm). This gap must be within the hatched area (see drawing).
*INSTALLATION* Installation Installation dimensions Installation in a tall cabinet/side view All dimensions are given in inches (mm). " 11/16 ≥19 0 ≥50 ≥0,2 ft² ≥200cm² ≥2 1 11 ≥5 /16* 50 * 69 3/4" +5/8" +5/8" 19/32" 15 4" 69 3/ /8" 3 16" + 22 1/ +10 560 27 3/8" 695 ≥0,2 ft² ≥200cm² * The declared energy consumption was achieved with a niche depth of 22 1/16" (560 mm).
*INSTALLATION* Installation Connections and ventilation All dimensions are given in inches (mm). The specified ventilation cross-sections must be adhered to in order to ensure the correct functioning of the refrigeration appliance. 8 3/8" 213 2 3/16" 55 5 11/16" 145 8 7/8" 225 a Front view b Power cord, length = 7' 2" (2,200 mm) A longer power cord is available to order from Miele Customer Service. c Water connection, length = 6' 6" (2,000 mm) d Ventilation cut-out min.
*INSTALLATION* Installation Limiting the opening angle of the appliance doors The door hinges are set to enable the appliance doors to be opened wide. If the opening angle of the doors needs to be limited to approx. 90°, the hinge can be adjusted to accommodate this. The locking pins for limiting the door opening must be installed before the appliance is installed.
*INSTALLATION* Installation Water connection Information on the plumbed-water connection Risk of injury and appliance damage if appliance is not connected properly. Failing to connect the appliance properly can result in personal injury and/or material damage. The appliance may only be connected to the plumbed-water connection by qualified specialists. Disconnect the refrigeration appliance from the power supply before connecting it to the water supply.
*INSTALLATION* Installation A shut-off valve must be provided between the hose and the plumbed-water connection to ensure that the water supply can be cut off if necessary. – Connecting the hose to the refrigeration appliance Make sure that the shut-off valve is still accessible after the appliance has been installed. Water supply Ensure that the connections are tight and leak-proof. Risk of damage to the hose. The water supply from the shut-off valve to the ice-cube maker has been interrupted.
*INSTALLATION* Installation – Connecting the hose to the shut-off valve Connect the nut to the shut-off valve . – Checking the plumbed-water connection Test the water connection for leaks before installing the appliance in the niche. Slowly open the shut-off valve and check the screw connections.
*INSTALLATION* Lead-free certificate Installation Lead free certificate This product is tested and certified by WQA against NSF/ANSI 372 for “lead free” This product F 1413 Vi (KIMSDF18US) is tested and certified by WQA against compliance. NSF/ANSI 372 for "lead free" compliance. Miele & Cie. KG Carl-Miele-Strasse 29 D-33332 Gütersloh Miele & Cie.
*INSTALLATION* Installation Electrical connection The refrigeration appliance must only be connected to a grounded outlet using the power cord supplied. The outlet must be easily accessible after the refrigeration appliance has been installed. If the outlet is not easily accessible, ensure that a suitable means of disconnection is provided on the installation side for each pole. Risk of fire from overheating.
Saving energy How to save energy: Installation location The refrigeration appliance has to cool more often at higher ambient temperatures and consumes more energy in the process. Therefore, you should: - Install the refrigeration appliance in a well-ventilated room. - Do not install the refrigeration appliance near to a heat source (heater element, range). - Protect the refrigeration appliance from direct sunlight. - Ensure an ideal ambient temperature of 68°F (20°C).
Guide to the appliance 32
Guide to the appliance a Display b Egg tray c Door shelf with fine adjustment d Fan with lighting e Dry back wall f Adjustable shelf with pivotable glass shelf (FlexiTray) g Adjustable shelf with lighting (FlexiLight 2.
Guide to the appliance Status display The touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react.
Guide to the appliance Settings mode In Settings mode, you can select the following appliance functions and alter their settings to some extent: Symbol Function Factory default Switching the Party-mode function on or off (see “Selecting additional settings”) Off Switching the Vacation-mode function on or off (see “Selecting additional settings”) Off Switching the ice-cube maker on and off (see “Making ice cubes”) Off / Switching the system lock on or off (see “Selecting additional set
Guide to the appliance / Switching the keypad tone on or off On / Changing the volume of the alarms and audible signals or switch them off entirely (see “Selecting additional settings”) On /level 5 Changing the display brightness (see “Selecting additional settings”) Level 4 Changing the temperature unit (°Celsius or °Fahrenheit) °C Switching the Demo-mode function off (only visible when switched on) (see “Selecting additional settings”) Off Resetting to default settings (see “S
Guide to the appliance Adjusting the interior fittings Using the door-shelf fine adjustment Press the gray buttons at the same time and slide the door shelf up and off the guide rails. Use the fine adjustment if you need greater height clearance on the door shelf/bottle shelf. You can change the height of the door shelf while it is loaded. Remove the guide rail from the lugs and move it to the desired position. Move the second guide rail parallel to the first rail.
Guide to the appliance Clipping the egg trays on Moving the shelf/shelf with lighting Clip the egg trays onto the rear edge of the door shelf. The shelves can be adjusted according to the height of the food. Adjusting or removing the bottle holder The non-slip fins of the bottle holder make bottles more secure when you open and close the appliance door. Raise the shelf slightly at the front and pull it forward a little.
Guide to the appliance Moving the adjustable shelf with pivotable glass shelf (FlexiTray) Using the bottle rack in the dividing plate Risk of damage caused by load- In the dividing plate, either the bottle rack or the glass shelf can be used. ing too much food and not distributing items evenly. Loading too much food and not distributing items evenly can damage the pivotable glass shelf. Do not exceed the maximum load size of 17.6 lb (8 kg).
Guide to the appliance Inserting the adapters for the baking tray The supplied adapters enable you to insert a baking tray in your refrigerator section with ease. The baking tray can be no more than 18 3/8" (466 mm) wide, 14 7/16" 386 mm) deep, and 2" (50 mm) high. Moving the carbon filter KKF-FS carbon filters with holder (Active AirClean) are available as optional accessories (see “Optional accessories”). When you are storing very strongsmelling food (e.g.
Guide to the appliance Optional accessories Bottle rack A range of useful Miele accessories and care products are available for your appliance. KKF-FS carbon filter with holder (Active AirClean) Carbon filters neutralize unpleasant odors in the refrigerator section for improved air quality. KKF-RF replacement filters (Active AirClean) Replacement filters to fit the holder are available. We recommend replacing the carbon filters every 6 months.
Switching on and off Before using for the first time Switching on the appliance Remove all packaging material and protective film. Open the appliance door. Clean the inside of the appliance and the accessories (see “Cleaning and care”). Connecting the appliance Connect the refrigeration appliance to the electricity supply as described in “Electrical connection”. will then appear on the appliance display, followed by .
Switching on and off Switching off the appliance You can only switch the entire refrigeration appliance off in Settings mode . Tap . Swipe left or right until is shown in the middle. Turning off the refrigerator section separately The refrigerator section can be switched off without having to switch off the freezer section. This is useful, e.g., while of vacation. Tap . Touch the temperature display for the refrigerator section. The cooling and interior lighting are switched off.
Switching on and off To note when switching off for longer periods of time If, during a long absence, the refrigeration appliance is switched off but not cleaned and the door is left shut, there is a danger of bacteria building up inside the appliance. It is essential to clean the refrigeration appliance. If the refrigeration appliance is not going to be used for a longer period of time, observe the following: Turn the appliance off. Unplug the appliance’s electrical plug or switch off the breaker.
The correct temperature It is very important to set the correct temperature to ensure the shelf life of food. Reducing the temperature reduces the growth rate of microorganisms. Food does not spoil as quickly. The temperature in the appliance will rise: - the more often the appliance door is opened and the longer it is kept open - the more food that is stored in it - the warmer the food is that is being put into it ... in the freezer section To freeze fresh food, a temperature of 0°F (-18°C) is required.
The correct temperature Temperature display In normal operation, the temperature display shows the current average refrigerator section temperature and the maximum freezer section temperature. Depending on the ambient temperature and the temperature setting, it can take the appliance a few hours to reach the temperature required and for this temperature to then be shown as a constant temperature on the display.
The correct temperature If you change the temperature setting: Check the temperature display after a few hours. It will take this long for an accurate reading to be given. - Wait for approx. 6 hours if the refrigeration appliance is not very full. - Wait for approx. 24 hours if the refrigeration appliance is full. If, after this time, the temperature is still too high or too low: Adjust the temperature again.
Using Automatic SuperCool and SuperFreeze Automatic SuperCool When switched on, the Automatic SuperCool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the ambient temperature). The refrigeration appliance will work at full power and lower the temperature. Select this function for the rapid chilling of large amounts of fresh food or drink.
Using Automatic SuperCool and SuperFreeze SuperFreeze When switched on, the SuperFreeze function can be used to rapidly reduce the temperature in the freezer section to its lowest setting (depending on the ambient temperature). The refrigeration appliance will work at full power and lower the temperature. Select this function before freezing fresh food. Fresh food will be frozen quickly, so that the nutritional value, vitamin content, appearance, and taste are maintained.
Selecting additional settings Explanation of the different settings Only the settings that require further explanation are described below. The door alarm and other warnings are automatically suppressed when you are in Settings mode . Party mode The Party-mode function is recommended if you wish to chill or freeze large amounts of fresh food or drink quickly or want to make ice cubes. Tip: Switch on the Party-mode function approx. 4 hours before placing food and drinks in the appliance.
Selecting additional settings Health risk caused by decom- Touch for approx. 6 seconds. posing food. The usability and quality of food in the refrigerator section may deteriorate if the temperature remains above 37°F (4°C) for an extended period. Only ever switch on the Vacationmode function for a limited period. Do not store any temperature-sensitive food which spoils easily, such as fruit, vegetables, fish, meat, and dairy products, during this time.
Selecting additional settings Sabbath mode Health risk caused by decom- The appliance features a Sabbath mode for the purposes of religious observance. posing food. As power failures are not indicated while Sabbath mode is active, food may be exposed to increased temperatures for a certain period of time. This will reduce the storage life of the food. If there is a power failure during Sabbath mode , check the quality of the food.
Selecting additional settings Changing the time before the door alarm is triggered You can set how quickly the door alarm should sound after an appliance door has been opened. Tap . Swipe left or right until is shown in the middle. Tap . Swipe left or right until the time you want between 30 seconds and 3 minutes 30 seconds is shown in the middle. Tap on the setting you want to confirm. Miele@home Your refrigeration appliance is equipped with an integrated WiFi module.
Selecting additional settings Availability of the WiFi connection The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can cause sporadic or even complete connection failures. Therefore, the availability of featured functions cannot be guaranteed. Miele@home availability The ability to use the Miele app depends on the availability of the Miele@home service in your country. The Miele@home service is not available in every country.
Selecting additional settings Resetting the network configuration Tap . Swipe left or right until is shown in the middle. Tap . Swipe right until is shown in the middle. Tap . Tap OK. All entered settings and values for Miele@home are reset to the default settings. The WiFi connection has been deactivated. will go out on the status display.
Selecting additional settings Switching off Demo mode Demo mode allows the refrigeration appliance to be presented in the showroom without the cooling system being switched on. Do not activate this setting for domestic use. If Demo mode has been switched on as a default setting, will show on the status display. Tap . Tap . Swipe left or right until is shown in the middle. Tap . After Demo mode has been switched off, the refrigeration appliance shuts down and must be switched on again.
Selecting additional settings Cleaning mode Cleaning mode makes it easier to clean the refrigerator section (see “Cleaning and care”). The interior lighting remains switched on, even though the refrigerator section is switched off. The audible signal will stop and the symbols on the display will also go out. If Cleaning mode is switched on, this will be indicated on the status display. After cleaning, Cleaning mode must be switched off.
Temperature and door alarm Health risk caused by decomposing food. If the temperature in the freezer remains above 0°F (-18°C) for a long time, the frozen food may start to defrost. This will reduce the storage life of the food. Check whether the frozen food has started to defrost. If it has, use the food as soon as possible or cook it before freezing it again.
Temperature and door alarm Door alarm The refrigeration appliance is equipped with a warning system to avoid increased energy consumption and food becoming warm if the appliance door is left open. If an appliance door is left open for a longer period of time, will light up yellow on the relevant temperature display. An alarm will also sound. You can change the time before the door alarm is triggered. However, the door alarm can also be turned off (see “Selecting additional settings”).
Storing food in the refrigerator section Do not load more than a maximum of 35 lb (16 kg) of food in the appliance door. Risk of fire from electrical appliances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance. Risk of explosion due to flammable mixes of gases. Electrical components can cause flammable mixes of gases to ignite. Do not store any explosive materials or products containing flammable propellants (e.g.
Storing food in the refrigerator section Different storage zones Coldest area Due to natural air circulation, there are different temperature zones in the refrigerator section. The coldest area in the refrigerator section is directly above the PerfectFresh Active zone dividing plate and at the back of the appliance. The temperature in the PerfectFresh Active zone compartments is even colder. Cold, heavy air sinks to the lowest section of the refrigeration section.
Storing food in the refrigerator section Food which is not suitable for storage in the fridge zone Not all food is suitable for refrigeration at temperatures below 40°F (5°C) because it is sensitive to cold. Foods which are sensitive to cold include: - pineapples, avocados, bananas, pomegranates, mangoes, melons, papayas, passion fruit, citrus fruits such as lemons, oranges, mandarins, grapefruits - fruit (which is not yet ripe) - eggplant, cucumbers, potatoes, peppers, tomatoes, zucchini - hard cheeses (e.
Storing food in the PerfectFresh Active zone PerfectFresh Active zone The PerfectFresh Active zone satisfies the requirements of a chill compartment to DIN EN 62552:2020. The PerfectFresh Active zone provides ideal storage conditions for fruit, vegetables, fish, meat, and dairy products. Food stays fresh considerably longer while retaining both flavor and vitamins. The temperature in the PerfectFresh Active zone is controlled automatically and maintained at 32 to 37°F (0 to 3°C).
Storing food in the PerfectFresh Active zone Selecting increased humidity When the setting is used, the humidifier should be switched on. The energy consumption does increase slightly when the humidifier is switched on. The appliance may also make more noise than usual. Tap . Swipe left or right until is shown in the middle. Tap . Swipe left until the humidifier intensity you want (1: low humidity; 3: maximum humidity) is shown in the middle.
Storing food in the PerfectFresh Active zone Humidifier When the humidifier is switched on, water vapor is supplied to the fruit and vegetables stored in the humidity-controlled compartment each time the appliance door is opened and approximately every 90 minutes. The water vapor provides additional humidity in the humidity-controlled compartment. The humidifier and its water container are located in the dividing plate between the refrigerator section and PerfectFresh Active zone.
Storing food in the PerfectFresh Active zone Filling the water container for the humidifier Dry compartment | The lower dry compartment has a temperature of 32 to 37°F (0 to 3°C) and the humidity is not increased . The dry compartment is suitable for storing perishable foods such as: - fresh fish and shellfish - meat, poultry, and sausage Press on the outer corners at the back of the glass shelf . The glass shelf will lift up at the front. Lift up the shelf and fold it back.
Storing food in the PerfectFresh Active zone Observe the following tips if you find that food you have stored does not keep well (e.g., food becomes limp or wilts after only being stored for a short time): Only place fresh food in the appliance as the initial condition of the food is crucial to maintaining freshness. Clean the compartments in the PerfectFresh Active zone before storing food in them. Very wet food should be dried off before storing it.
Freezing and storing food Always observe USDA food safety guidelines. Risk of fire from electrical appliances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance. Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded.
Freezing and storing food Home freezing Before placing food in the freezer When freezing more than 4.4 lb (2 kg) of fresh food, switch on the SuperFreeze function for 6 hours before placing the food in the freezer. When freezing even larger amounts of food, switch on the SuperFreeze function for 24 hours before placing the food in the freezer. This helps frozen food which is already stored in the freezer to stay frozen. Only freeze food that is fresh and in good condition.
Freezing and storing food – Freezing small amounts of food Place the food in the upper freezer drawers. Place the food flat in the bottom of the upper freezer drawers so that it freezes through to the core as quickly as possible. – Freezing the maximum amount of food (see data plate) If the ventilation slots are obstructed, the cooling performance will decrease and energy consumption will increase. When placing food in the freezer, make sure that the ventilation slots are not blocked.
Freezing and storing food Cooling drinks quickly To cool drinks quickly in the refrigerator section, switch on the Automatic SuperCool function . If you want to cool a large amount of drinks, or if you want to cool drinks in the freezer section, select Party mode in Settings mode . When cooling drinks quickly in the freezer, make sure bottles are not left in for more than one hour. Otherwise they could burst.
Making ice cubes Check and pay attention to the following before switching the ice-cube maker on: - The ice-cube maker must be clean. - The refrigeration appliance must be switched on. - The ice-cube drawer contains an adjustable partition. You can adjust the size of the area in which the ice cubes will collect depending on the amount of ice you require. - The drawer area below the ice-cube maker must be empty. - Ice cubes can only be made when the ice-cube drawer is completely closed.
Making ice cubes As soon as ice cubes are produced, they will empty automatically from the integrated ice-cube tray and into the drawer. The ice-cube tray cannot be removed. Ice-cube production is halted automatically when the ice-cube drawer is full. The drawer will not fill up to the top edge. Tip: Empty the ice-cube drawer at regular intervals, or if you have not produced any ice for more than a week. This will ensure that you always have fresh ice and the ice cubes will not form a clump.
Defrosting WARNING! DANGER of injury Freezer section and damage! Do not use any mechanical or other types of aids which are not recommended by the manufacturer to accelerate the defrosting process. The appliance is equipped with a “NoFrost” system. The freezer defrosts automatically. Refrigerator section and PerfectFresh Active zone The refrigerator section and the PerfectFresh Active zone defrost automatically.
Cleaning and care WARNING! DANGER of electric shock! Unplug the appliance or trip the circuit breaker. WARNING! Fire hazard! Do not damage the coolant pipework. The data plate located inside the interior cabinet of the refrigeration appliance must not be removed. It contains information which is required in the event of a service call. Do not let water get into the electronic or the lighting.
Cleaning and care Preparing the refrigeration appliance for cleaning Cleaning the refrigerator section only: Switch Cleaning mode on. The cooling system in the refrigerator section is switched off, but the interior lighting remains switched on. Tap . Swipe left or right until is shown in the middle. Tap . To leave this Settings level, tap . If Cleaning mode is switched on, this will be indicated on the status display.
Cleaning and care Cleaning the interior of the appliance Clean the appliance regularly, or at least once a month. Cleaning accessories by hand or in the dishwasher The following components must be cleaned by hand only: - the stainless steel trims or strips If soiling is left on for any length of time, it may become impossible to remove under certain circumstances. Surfaces may become discolored or damaged. It is therefore best to remove any soiling immediately.
Cleaning and care - shelves and bottle shelves in the appliance door (without stainless steel trim) - door shelf with fine adjustment - the adjustable shelves (without the strips or printing) - the glass shelves (without trim) - the partition for the ice-cube drawer - the 2 pieces that make up the water container for the humidifier - the adapters for the baking tray Push the shelf back down onto the guide rails.
Cleaning and care Dismantling the adjustable shelf/adjustable shelf with lighting Risk of damage as a result of incorrect cleaning. The stainless steel trim with LED lighting will be damaged if you place it in water for cleaning. Clean the stainless steel trim with LED lighting with a damp cloth. Remove the stainless steel trim or stainless steel trim with LED lighting before cleaning the adjustable shelf. Place the adjustable shelf on a soft surface (e.g.
Cleaning and care Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray) Place the adjustable shelf with pivotable glass shelf on a countertop covered with a soft material (e.g., a dish towel). Take a firm hold of the top right of the bottom adjustable shelf and pull the tray firmly off the adjustable shelf. The fastener on the tray comes loose from the circular recess at the end of the runner guide . Bring the tray to the front.
Cleaning and care Release the retainers and lift the shelf up. The glass panel comes loose. Both parts can now be cleaned. Place the frame on the adjustable shelf so that the arrows on the adjustable shelf line up with the recesses on the frame. Assembling the adjustable shelf with pivotable glass shelf (FlexiTray) Put the plastic adjustable shelf down on the countertop so that the recess is at the top and the stainless steel trim is at the front.
Cleaning and care Removing the drawers from the refrigerator section Removing and dismantling the water container for the humidifier Risk to health due to contami- Pull the drawer out as far as it will go. Holding the sides of the drawer at the back, lift it up and then forward and out. Push the telescopic runners back in again to avoid damaging them. Risk of damage as a result of incorrect cleaning.
Cleaning and care Remove the water container. Removing the dividing plate and bottle rack Remove the glass shelves at the front and back of the dividing plate. Separate the water container into its 2 pieces and clean them by hand or in the dishwasher. Reinsert the water container. Fold the glass shelf back down. Lift the bottle rack at the front and pull it out. After cleaning, slide the bottle rack all the way in and push it down. Place the glass shelves back on the dividing plate.
Cleaning and care Removing the drawers and glass shelves from the freezer section Removing the telescopic runners from the glass shelf Removing the drawer on telescopic runners Pull the drawer out as far as it will go. Holding the sides of the drawer at the back, lift it up and then forward and out. Push the telescopic runners back in again to avoid damaging them. Replacing the drawer Place the drawer on the fully retracted telescopic runners.
Cleaning and care After cleaning the shelf, reattach the protective trim. Replacing the carbon filters (optional accessories) Replace the carbon filters in the holder around every 6 months. The symbol on the status display reminds you that the carbon filter needs to be changed. Replacement KKF-RF carbon filters can be obtained from Miele Customer Service, from your dealer, or from Miele’s website.
Cleaning and care Touch the symbol on the display to confirm that the filters have been replaced. The “Replace carbon filter” reminder will go out on the display and the counter will be reset. Selecting the cleaning position for the ice-cube tray Before selecting the cleaning position for the ice-cube tray, check the following: - The ice-cube maker is switched on. The symbol will go out on the status display. - The ice-cube drawer is empty and in position. Cleaning the ice-cube tray Tap .
Cleaning and care Cleaning the door seal Risk of damage as a result of incorrect cleaning. If you treat the door seal with oil or grease, it can become porous. Do not use oil or grease on the door seal. The door seals should be cleaned regularly with clean water, and then wiped dry with a soft cloth. Cleaning the ventilation gaps A build-up of dust will increase the energy consumption of the appliance.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. To prevent cold from escaping, open the appliance doors as little as possible until the fault has been corrected.
Frequently Asked Questions Problem Possible cause and solution Close the appliance doors. After a while, the temperature will return to normal by itself. If a thick layer of ice has already formed, this will affect cooling and increase energy consumption. Defrost the appliance and clean it. The ambient temperature is too high. The higher the ambient temperature, the longer the compressor runs. See the information in the section on “Installation – Installation location”.
Frequently Asked Questions Problem Possible cause and solution The compressor comes on less and less often and for shorter periods of time. The temperature in the appliance rises. This is not a fault. The temperature setting is too high. Correct the temperature setting. Check the temperature again after 24 hours. The food begins to thaw. The ambient temperature is too low for this appliance. If the ambient temperature is too low, the compressor will run less frequently.
Frequently Asked Questions Other problems Problem Possible cause and solution The food is affected by the setting in the humidity-controlled compartment. There is too much condensate in the humidity-controlled compartment. Wipe off any condensate with a cloth. Place a rack or similar item in the compartment so that excess moisture can drain away. Open the compartment lid by moving it to the low humidity position and switch the humidifier off.
Frequently Asked Questions Messages in the display Message Possible cause and solution lights up on the status display, the refrigeration appliance does not get cold even though the controls and the interior lighting are working. Demo mode has been activated. Tap . Tap . Swipe left or right until is shown in the middle. Tap . is lit up on the display and the appliance cannot be used. The Cleaning mode function is still switched on.
Frequently Asked Questions Message Possible cause and solution The symbol lights up The carbon-filter change indicator reminds you on the status display that the carbon filter needs to be changed. and an audible signal Replace the carbon filter in the holder (see “Cleanalso sounds. ing and care – Replacing the carbon filters (optional accessories)”) and touch the symbol on the display to confirm that you have changed the carbon filter. The symbol will go out on the status display.
Frequently Asked Questions Message Possible cause and solution lights up yellow in the temperature display for the refrigerator section and/or the freezer section and an alarm also sounds. The door alarm has been activated. Touch and hold in the display for a few seconds. lights up red in the freezer-section temperature display and an alarm also sounds. The temperature alarm has been activated; the temperature in the freezer section has risen higher or fallen lower than the temperature set.
Frequently Asked Questions Message Possible cause and solution lights up red in the Indication of an interruption to the power supply: the temperature in the freezer section over the last few display and an alarm days or hours has risen too high because of a power also sounds. failure. Tap . The fault message is confirmed: goes out and the alarm will stop. The warmest temperature recorded in the freezer section will flash for about 1 minute on the temperature display for the freezer section.
Frequently Asked Questions Message Possible cause and solution There is a fault. Tap on the display to switch the alarm off. Contact Miele Customer Service. lights up red in the display and a fault code F with numbers may appear. An alarm will also sound. To report the fault, you need the fault code and also the model identifier and serial number of your refrigeration appliance. You can access this information on the display. To do this, touch on the display.
Frequently Asked Questions Problems with the humidifier Problem Possible cause and solution The humidifier is not supplying moisture to the food in the PerfectFresh Active zone. The humidifier is not switched on. Tap on the symbol in Settings mode . The compartment lid has been pulled forwards to the “Low humidity ” setting. Push the compartment lid backward so that the “Increased humidity ” setting is selected. There is not enough water in the water container.
Frequently Asked Questions Problem Possible cause and solution Only open the appliance door when necessary and for as short a time as possible. The temperature in the freezer section is too high. Select a lower temperature. The water-connection pressure is too low. Check that the water-connection pressure is between 21.7 psi and 90 psi (1.5 and 6.2 bar). Remember that it can take up to 24 hours for the production of ice cubes to commence. The ice cubes have an unpleasant odor or flavor.
Frequently Asked Questions The interior lighting is not working Risk of electric shock due to exposed, live electrical components. When removing the lighting cover, there is a risk of coming into contact with live electrical components. Do not remove the lighting cover. The LED lighting may only be repaired or replaced by Customer Service. Risk of injury from LED lighting. This lighting corresponds to risk group RG 2. If the cover is defective, there is a risk of eye injury.
Frequently Asked Questions Problem Possible cause and solution The LED lighting on one The shelf is not sitting correctly on the shelf supof the adjustable ports. shelves is not working. Check that the shelf is positioned correctly on the shelf supports. The shelf has metal contacts at the front left corner which supply power to the LED lighting. Push in the shelf until it clicks into position. The LED lighting on the stainless steel trim is faulty.
Causes of noises Normal noises Cause Brrrrr... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulates through the pipes. Click... Clicking sounds occur whenever the thermostat switches the motor on or off. Sssrrrrr... You can sometimes just hear the sound of the fan inside the appliance. Crack...
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 www.mieleusa.com Customer Support Phone: 888-99-MIELE (64353) info@mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
KFN 7795 D en - US/CA M.-Nr.