Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Status display
- Adjusting the interior fittings
- Using the door-shelf fine adjustment
- Repositioning the door shelf with fine adjustment
- Moving the door shelf/bottle shelf
- Clipping the egg trays on
- Adjusting or removing the bottle holder
- Moving the shelf/shelf with lighting
- Moving the adjustable shelf with pivotable glass shelf (FlexiTray)
- Using the bottle rack in the dividing plate
- Removing and reinserting the organization box
- Inserting the adapters for the baking tray
- Moving the carbon filter
- When you are storing very strong-smelling food (e.g., cheese):
- Optional accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Explanation of the different settings
- Party mode
- Vacation mode
- Switching the safety lock function / on
- Deactivating the safety lock function / temporarily
- Switching the safety lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and audible signals /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Carbon-filter change indicator
- Cleaning mode
- Explanation of the different settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Active zone
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior of the appliance
- Cleaning accessories by hand or in the dishwasher
- Removing, dismantling, and cleaning accessories
- Removing the door shelf with fine adjustment
- Dismantling the door shelf/bottle shelf
- Dismantling the adjustable shelf/adjustable shelf with lighting
- Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Assembling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Removing the drawers from the refrigerator section
- Replacing the drawers
- Removing and dismantling the water container for the humidifier
- Removing the dividing plate and bottle rack
- Removing the compartment lid
- Removing the drawers and glass shelves from the freezer section
- Removing the drawer on telescopic runners
- Replacing the drawer
- Removing the bottom drawer
- Removing a glass shelf
- Removing the telescopic runners from the glass shelf
- Replacing the carbon filters (optional accessories)
- Cleaning the ice-cube tray
- Cleaning the door seal
- Cleaning the ventilation gaps
- After cleaning
- Frequently Asked Questions
- Causes of noises
- Customer Service
IMPORTANT SAFETY INSTRUCTIONS
8
The more coolant there is in a refrigeration appliance, the larger
the room it should be installed in. In the event of a leakage, if the ap-
pliance is in a small room, there is the danger of a combustible gas/
air mixture building up. For every 11g of coolant, at least 1m
3
of
room space is required. The amount of coolant in the refrigeration
appliance is stated on the data plate inside the appliance.
To avoid the risk of damage to the appliance, make sure that the
connection data (fuse rating, frequency and voltage) on the data
plate corresponds to the household supply.
Check that this is the case before connecting the appliance. Consult
a qualified electrician if in any doubt.
The electrical safety of the appliance can only be guaranteed
when correctly grounded. It is essential that this standard safety re-
quirement is met. If in any doubt please have the electrical installa-
tion tested by a qualified electrician.
Temporary or permanent operation on an autonomous power sup-
ply system or a power supply system that is not synchronized with
the grid power supply (e.g., island networks, back-up systems) is
possible. A prerequisite for operation is that the power supply sys-
tem complies with national and local codes.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronized with the grid power supply, or these measures must be
replaced by equivalent measures in the installation.
If the power cord supplied is damaged, it must only be replaced
by an original part to prevent a hazard for the user. Miele can only
guarantee the safety of the appliance when original Miele parts are
used.
Do not connect the appliance to the electrical supply with a power
bar or extension cord. These are a fire hazard and do not guarantee
the required safety of the appliance.