Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Status display
- Adjusting the interior fittings
- Using the door-shelf fine adjustment
- Repositioning the door shelf with fine adjustment
- Moving the door shelf/bottle shelf
- Clipping the egg trays on
- Adjusting or removing the bottle holder
- Moving the shelf/shelf with lighting
- Moving the adjustable shelf with pivotable glass shelf (FlexiTray)
- Using the bottle rack in the dividing plate
- Removing and reinserting the organization box
- Inserting the adapters for the baking tray
- Moving the carbon filter
- When you are storing very strong-smelling food (e.g., cheese):
- Optional accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Explanation of the different settings
- Party mode
- Vacation mode
- Switching the safety lock function / on
- Deactivating the safety lock function / temporarily
- Switching the safety lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and audible signals /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Carbon-filter change indicator
- Cleaning mode
- Explanation of the different settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Active zone
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior of the appliance
- Cleaning accessories by hand or in the dishwasher
- Removing, dismantling, and cleaning accessories
- Removing the door shelf with fine adjustment
- Dismantling the door shelf/bottle shelf
- Dismantling the adjustable shelf/adjustable shelf with lighting
- Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Assembling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Removing the drawers from the refrigerator section
- Replacing the drawers
- Removing and dismantling the water container for the humidifier
- Removing the dividing plate and bottle rack
- Removing the compartment lid
- Removing the drawers and glass shelves from the freezer section
- Removing the drawer on telescopic runners
- Replacing the drawer
- Removing the bottom drawer
- Removing a glass shelf
- Removing the telescopic runners from the glass shelf
- Replacing the carbon filters (optional accessories)
- Cleaning the ice-cube tray
- Cleaning the door seal
- Cleaning the ventilation gaps
- After cleaning
- Frequently Asked Questions
- Causes of noises
- Customer Service
Frequently Asked Questions
94
Message Possible cause and solution
lights up yellow in
the temperature display
for the refrigerator sec-
tion and/or the freezer
section and an alarm
also sounds.
The door alarm has been activated.
Touch and hold
in the display for a few sec-
onds.
The alarm tone will stop and the
symbol will go
out.
Close the relevant appliance door.
lights up red in the
freezer-section temper-
ature display and an
alarm also sounds.
The temperature alarm has been activated; the tem-
perature in the freezer section has risen higher or
fallen lower than the temperature set.
Possible reasons for this include:
– The appliance door was opened too frequently.
– A large quantity of fresh food has been placed
in the freezer without switching on the Super-
Freeze function.
– A prolonged power failure has occurred.
– The refrigeration appliance has a fault.
Tap
.
The alarm message is confirmed:
goes out and
the alarm stops.
The warmest temperature recorded in the freezer
section will flash for about 1minute in the display.
Then the temperature display will change to the cur-
rent temperature in the freezer section.
You can exit from the flashing temperature display
early:
Touch the temperature display for the freezer sec-
tion.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer section.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, cook it
before freezing it again.