Installation Instructions

Temperature display
In normal operation the display
shows the current average
refrigerator temperature and the
temperature in the warmest part of
the freezer.
Dashes are displayed if the
temperature in the freezer section is not
within the displayable range.
Depending on the room temperature, it
can take several hours (3 to 8) until the
selected temperature is reached and
displayed steadily.
If the temperature was above 0°F
(-18°C) for a longer period of time
you will need to check to make sure
that no frozen food started to thaw.
Any food that started to thaw must
be used as soon as possible!
The temperature display flashes when
– a new temperature is being set,
– the temperature in the appliance has
risen by several degrees, indicating
that it is warming up too much, or
– a fault is displayed "F1" to "F5" (see
"Frequently asked questions").
This short-term loss of cooling is no
cause for concern in the following
cases:
– when the door has been left open for
a while, for example to take out or
put in a large amount of food,
– when fresh food is being frozen.
Setting the temperature for the
refrigerator and freezer
The temperatures for the refrigerator
and the freezer are set separately using
the buttons for the respective section.
^ Set the desired temperatures using
each of the buttons.
Tap
– Up to increase the temperature
– Down to decrease the temperature.
The temperature display flashes while
you set the new temperature.
The Right Temperature
19