Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 5
- Guide to the Appliance 11
- How to save Energy 14
- Turning the Appliance On / Off 16
- The Right Temperature 18
- Using SuperCool in the refrigerator section 21
- Using SuperCool in the freezer section 22
- Temperature and Door Alarm 23
- Additional Settings 25
- Using the Refrigerator Efficiently 30
- Arranging the Interior - Refrigerator Section 32
- Freezing and Storing Food 34
- Making Ice Cubes 36
- Arranging the Interior - Freezer Section 39
- Defrosting 41
- Cleaning and Care 42
- Frequently asked questions 46
- Noises 54
- After sales service 55
- Caring for the environment 58
- Installation Information 59
- Installation Dimensions 62
- Niche Dimensions 64
- Door Swing Clearance 65
- Planning the Water Connection 66
- Information Concerning the door panel 67
- Installing the Appliance 69
- Installing the Appliance 69
- Installing the anti-tip brackets 69
- Fastening the covers 71
- Pushing the appliance into the niche 72
- Aligning the appliance 72
- Securing the appliance in the niche 73
- Aligning the appliance door 73
- Aligning the drawer front 74
- Install the base cover with the ventilation slits 74
- Removing the mounting rails 76
- Installing the mounting rails on the door panel 77
- Installing the door panel on the appliance door 77
- Installing the door panels on the freezer drawers 81
- Plumbing 82
- Electrical connection 86
- Contact details 91
^ Touch the Super button again to
confirm your selection.
0 appears in the control panel when
the safety lock is activated.
^ To leave the settings mode, touch the
button for turning the freezer section
on and off.
Temperature unit (Fahrenheit
or Celsius) §
The temperature can be displayed in
Fahrenheit (°F) or Celsius (°C).
The factory default is Fahrenheit.
Selecting the temperature unit
^ Press and hold the SuperCool button
for the freezer secion On / Off button
for 5 seconds.
The SuperCool indicator ª to the right
of the display is on during this time, and
after 5 seconds S flashes in the lower
temperature display (freezer section).
The display shows MENU. You are now
in the settings mode.
^ Tap the button for setting the
temperature in the freezer section
until a flashing § appears in the lower
temperature display.
^ Touch the Super button again.
The following will appear in the display:
– §C(Temperature display in Celsius),
or
– §F(Temperature display in
Fahrenheit).
^ Touch the Super button again to
confirm your selection.
The temperature is now displayed in
the selected unit.
^ To leave the settings mode, touch the
button for turning the freezer section
on and off.
Additional Settings
27