Installation Instructions

Turning the ice cube maker Off
The ice cube maker can be turned off
independently of the freezer section if
you do not want to make any ice cubes.
^ Touch the button for switching the ice
cube maker on and off so that the
indicator light of the ice cube maker
®goes out.
When the ice cube maker will be
turned off for a long period of time:
^ Shut off the water supply to the ice
cube maker.
When the ice cube maker LED ®
starts blinking, the remaining water in
the supply line is in the ice cube
maker.
Leave the ice cube maker on and
working for one day so that the
remaining ice cubes are ejected.
^ Turn off the Ice maker.
^ Remove all ice cubes from the
drawer and dispose of them.
Setting the water quantity for
the ice cube tray E
The size of the ice cubes that are
produced depends on the quantity of
inflowing water.
The quantity of inflowing water can be
adjusted to make larger ice cubes.
^ Press and hold the SuperCool button
for the freezer section On / Off button
for 5 seconds.
The SuperCool indicator ª to the right
of the display is on during this time, and
after 5 seconds S flashes in the lower
temperature display (freezer section).
The display shows MENU. You are now
in the settings mode.
^ Press and hold the button for setting
a higher or lower temperature in the
freezer section until a flashing E
appears in the lower temperature
display.
^ Touch the Super button again.
E3 appears in the temperature display
(factory default).
The water quantity can be set between
E1 (lowest water quantity) and E8
(highest water quantity).
Making Ice Cubes
37