Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 5
- Guide to the Appliance 11
- How to save Energy 14
- Turning the Appliance On / Off 16
- The Right Temperature 18
- Using SuperCool in the refrigerator section 21
- Using SuperCool in the freezer section 22
- Temperature and Door Alarm 23
- Additional Settings 25
- Using the Refrigerator Efficiently 30
- Arranging the Interior - Refrigerator Section 32
- Freezing and Storing Food 34
- Making Ice Cubes 36
- Arranging the Interior - Freezer Section 39
- Defrosting 41
- Cleaning and Care 42
- Frequently asked questions 46
- Noises 54
- After sales service 55
- Caring for the environment 58
- Installation Information 59
- Installation Dimensions 62
- Niche Dimensions 64
- Door Swing Clearance 65
- Planning the Water Connection 66
- Information Concerning the door panel 67
- Installing the Appliance 69
- Installing the Appliance 69
- Installing the anti-tip brackets 69
- Fastening the covers 71
- Pushing the appliance into the niche 72
- Aligning the appliance 72
- Securing the appliance in the niche 73
- Aligning the appliance door 73
- Aligning the drawer front 74
- Install the base cover with the ventilation slits 74
- Removing the mounting rails 76
- Installing the mounting rails on the door panel 77
- Installing the door panel on the appliance door 77
- Installing the door panels on the freezer drawers 81
- Plumbing 82
- Electrical connection 86
- Contact details 91
^ To adjust the toe-kick height, first
loosen the headless screws at the
cover front and adjust the cover
height.
^ Then tighten the headless screws.
Removing the mounting rails
^ Remove the cover strip a and the
upper b and lower mounting rails of
the refrigerator door.
^ You will need these nuts for fastening
the custom door panel to the
refrigerator door.
Both mounting rails will later be
fastened to the door panel of the
refrigerator door.
^ Remove the cap covers and loosen
the screws on both sides.
^ Remove the mounting rails on the
sides of both freezer drawers.
These mounting rails will later be
installed on the door panel of the
freezer drawers.
^ You will need the nuts for fastening
the door panel to the freezer drawers.
Installing the Appliance
76